SH120 automatic four ball machine grease wear resistance tester is in the form of sliding friction, under the condition of extremely high point contact pressure, mainly used to evaluate the bearing capacity of lubricants.
In practical application, different evaluation indexes can be selected according to different uses of lubricants.
automatic lubricant grease four ball wear testing machine
The four-ball friction testing machine can also do lubricant long-term wear resistance test, determination of friction coefficient, record friction and temperature curves.
The use of special accessories, can also carry out the end face friction and material simulation test.
Friction tester Petroleum Product Four Ball Wear Testing Machine ASTM D2266 ASTM D2783
Four-Ball Friction Tester in Accordance with ASTM D2783/D2266 Standard
Four Ball Friction Tester
Computerized four-ball wear test machine, lubricant wear tester
Four Balls Friction Wear Testing Machine
Computer Control Servo Four Ball Friction Testing Machine
Computerized Four Ball Wear Tester / Wear Testing Machine
The machine design principle draw lever four ball machine load stability on the basis of the characteristics of the loading of the servo valve by servo motor, air spring, closed-loop control software to realize automatic reset, automatic loading, automatic stay, automatic test, automatic unloading and automatic measurement spot diameter and take pictures, a key operation, the data storage is a key save the test speed, small error, good repeatability, no pollution, no noise, high efficiency.
automatic lubricant grease four ball wear testing machine
Product Paramenters
| No. | Tech Indicator and Description |
| 1 | Standard:GB/T3142, ASTM D2783,DIN 51350,JIS K2519,IP 239,Soviet Union9490-75 |
| 2 | Power: AC220V±10% 50Hz (Can be changed to your country request) |
| 3 | Evaluate the Last Nonseizure load, Weld Point, LWI and Anti-wear Test for Lubricating Oil,Lubricating Grease and Cutting Solution. |
| 4 | Control the Quantity of Additives in the Lubricating Oil,Lubricating Grease and Cutting Solution. |
| 5 | Meet Requirements in ASTM, ISO, DIN, GB and SH/T. |
| 6 | Make the Wearing and Welding Tests in Same Tester. |
| 7 | Use the High Precision Servo Systems to Get Stepless Speeds. |
| 8 | Use Scar Test Method and Friction Coefficient Test Method to Achieve the Online Test. |
| 9 | Magnify the Scar From 38 to 254 Times by Shadow Electron Microscope. |
| 10 | Assemble Weights Lifter to Save Manpower. |
| 11 | Use the Industrial Computer and High-end Control Card to Achieve the High Accuracy Curve. |
| | Converted the Test Report as PDF Format to Save and Advertise Easily. |
II. Main technical parameters:
| no | name | Technical indicators |
| 1 | Test force | |
| 1.1 | Working range of axial test force | 10～10000N |
| 1.2 | relative error of the test force | ±1％ |
| 1.3 | When the test force is long, the indicating error is automatically maintained | ±1％F.S |
| 2 | Friction torque | |
| 2.1 | Range of friction torque measurement | 0～13500N.mm |
| 2.2 | relative error of the friction torque is shown | ±3％ |
| 3 | Spindle speed | |
| 3.1 | Spindle frequency conversion speed range | 10～2000r/min |
| 3.2 | Spindle speed error | ±5r/min |
| 4 | oil box stroke | ＞45mm |
| 5 | Taper of spindle inner hole | 1:7 |
| 6 | Heating system of testing machine | |
| 6.1 | Operating temperature range of heater | At room temperature～250℃ |
| 6.2 | Temperature control accuracy | ≤2℃ |
| 7 | Testing machine spindle control | |
| 7.1 | Time display and control range of testing machine | 1～99999s或1-99999min |
| 7.2 | Test machine revolution display and control range | 999999999 |
| 7.3 | Maximum torque output of the main motor of the tester | 2.3N.m |
| 8 | Quantity of oil used in a test | about10ml |
| 9 | Special standard steel ball diameter | Ф12.7 |
| 10 | Dimensions of the testing machine (length × width × height mm) | about1160×750×1640 |
| 11 | Net weight of testing machine | about550kg |
| 12 | Rated power of testing machine | 5.5KW |
Accessories
| Category | S/N | Name | Quantity | Remarks |
| product | 1 | Host | 1set | |
| 2 | Computer (LCD) | 1set | lenovo |
| 3 | Printer | 1 set | hp |
| 4 | 15Jspeckle measuring microscope | 1 set | |
| Attachment | 1 | High temperature wear drop oil tank | 1 set | |
| 2 | Room temperature friction sub-oil tank | 1 set | |
| 3 | Four-ball special steel ball | 1box | |
| 4 | Oil retaining ring (high/low temperature) | each1piece | |
| 5 | Spring chuck | 2 piece | |
| 6 | Liju wheel | 1 piece | |
| Tool | 1 | Lifting screw | 4 piece | |
| 2 | Shock cushion iron | 4 piece | |
| 3 | Medical Tweezers (Medium) | 1 piece | |
| 4 | Medium lumbar disc | 1 piece | |
| 5 | Tank wrench (high/low) | each1 piece | |
| 6 | Spring chuck loading and unloading wrench | 1 piece | |
| 7 | Chuck hammer rod | 1 piece | |
| Technical condition | 1 | Product instruction manual | 1 copy | |
| 2 | software instruction manual | 1 copy | |
| 3 | Certificate of qualification | 1copy | |
| 4 | | | |
Product Tags:
|
|
SH120 Automatic Lubricating Grease Wear Resistance Tester Four Ball Machine Images
|
